edge angle
英 [edʒ ˈæŋɡl]
美 [edʒ ˈæŋɡl]
雪橇底部与雪面的角度; 棱角；偏角；边缘角
双语例句
- Only the thin edge of the angle to be visible when viewed face on.
只有边缘薄的角度观看时可以看到面对。 - It was surprisingly easy to shape the bending edge with the angle grinder.
这是出乎意料的轻松，以形弯曲边与角磨。 - The Principles and Application of Finish Turning Tool with Large Edge Rake Angle To blunt or dull ( the edge of a cutting instrument).
大刃倾角外圆精车刀的工作原理及应用弄钝，弄卷刃（切割工具的刃） - Metal blades are best because they will maintain a consistent edge and print angle.
最好采用金属叶片，因为它能保持均匀的边缘和印刷角度。 - A harrow with a series of disks set on edge at an angle.
在角落的边上有一系列圆盘的耙机。 - The style of the blade depends largely on the edge angle.
刀片的形式不主给取决于刃角。 - The edge angle is created primarily by inclination with extended outside leg.
立刃的角度主要是由伸展的外侧腿的侧倾实现的。 - For the leading edges of same radius, the larger leading edge wedge angle causes the smaller laminar separation bubble.
前缘圆弧半径相同而前缘楔形角不同的叶片，在同一工况下，前缘楔形角越大分离泡越小，流动分离越弱。 - The result shows that the cutter blade edge radius, edge angle, the linear abrasion and the edge notch depth are main factors affecting its sharpness.
分析结果表明，纤维切割过程中，切断刀锋利性能的变化主要与切断刀的初始刃口半径、刃口角度、刃口的磨损量以及刃口上缺口的深度有关。 - Measurement and Significance of Three-dimensional Center Edge Angle of Developmental Dislocation of Hip Joint in Children
儿童发育性髋关节脱位三维CE角的测量及其意义 - The relationship between the edge inclination angle and the chip deformation is qualitatively analysed.
斜角切削的理论分析定性地分析刃倾角λ3与切屑变形的关系； - Silica rock, commonly assume edge angle or hypo-edge angle.
硅质岩碎屑一般呈棱角状或次棱角状。 - Changing the edge angle of the second gas ring resulted in reduction of wear of the piston ring and also effective removing of the oil spread on the liner.
对二道气环的改进能减少活塞环的磨损，并提高刮油效果； - In the production of metal fiber in a cutting way of big edge inclination angle, low productivity is the key problem to hold back the development and application of this technology.
在用大刃倾角切削法制造金属纤维的生产中，生产效率较低是制约该技术发展应用的关键问题。 - And the main factors which influence critical tool cutting edge angle are studied, and related theory analysis are made. Furthermore, some new controlling methods and technologys to restrain or decrease the feed direction burrs in machining Processes are developed.
讨论了有关主要因素对临界主偏角的影响，进而开发出了几种抑制或减小进给方向毛刺的新工艺和新方法。 - Calculation of Side Cutting Edge Angle of Gear Shaping Cutter
插齿刀侧刃切削角度的计算 - During damage tolerance analysis, the probably crack types of key danger position are surface crack and edge angle crack in this article.
在损伤容限分析中，本文认为关键危险部位可能萌生的裂纹形态为表面裂纹与棱边角裂纹； - On the base of the interpolation, this paper also introduced the notion of edge angle, by which it can wipe off some corner candidate that is falsely reported.
在插值的基础上，可计算出边缘角，通过它来对角点候选点作进一步的筛选。 - The unsteady lift characteristics of a delta wing with leading edge sweep angle 60 ° are investigated, when the wing is rapidly pitching up at incidence from 0 ° until 90 °.
对前缘后掠60°的三角翼在迎角0°～90°范围内快速上仰时的升力进行了测量。 - Study on Deformation of Oblique Cutting with Large Cutting Edge Inclination Angle
大刃倾角切削的变形研究 - It is found that un-breaking field will be enlarged with the decrease of the tool cutting edge angle because of the lessening of the diameter of the cutting angles.
指出随主偏角的减小，其非折断区域将进一步扩大，切屑外径的减小是其不折断的主要原因。 - The conical grinding method has four grinding parameters, and for three drill point geometric parameters, the lip clearance angle, chisel edge angle and point angle, the flank configuration is not unique.
麻花钻锥面刃磨方法有4个刃磨参数，当给定外缘转点的结构圆周后角、横刃斜角、锋角这3个结构参数时，后刀面的形状并不唯一。 - The influence of the compressor blade leading edge wedge angle on the leading edge separation bubble
压气机叶片前缘楔形角对前缘分离泡的影响 - The Application of PLC in the Catalyst Production Working Procedure of Edge Angle Lapping
PLC在催化剂生产磨角工序中的应用 - With the gas nozzle size and the orifice edge angle increasing, the bubble can detach from the orifice more quickly, but the detaching diameters of bubble increase.
随孔径及孔口边缘角的增加，气泡更快地脱离孔口，但脱离直径增加。 - Analyze the changing temperature stress of raft concrete; emphasize analyze the stress condition of the pile raft contact place and analyze the changing stress before and after dismantling formwork in edge and angle point.
对桩筏接触处的应力状况和拆模前后边、角点处的应力变化进行分析研究，结果表明并没有出现应力突变的状况。 - The veracity of calculated results is depended on the relation of detonation speed with the curvature of detonation front and the edge angle of explosive with air or other medium.
但应指出的是，这类计算结果的精度在很大程度上取决于所采用的爆速曲率关系是否准确，以及所采用的爆轰波在炸药与空气或其它介质边界处的夹角是否合适等。